We would agree that camping is really exciting but it is important we learn how to clean a tent. Cleaning a tent makes camping delightful. Before setting up your tent, make sure everything is clean, well polished and inadequate working condition.
We would be lecturing you on some simple procedures on how to clean a tent:
1. Clean Your Tent before You Break Camp
The first step is to sweep the inside of the tent to get rid of dirt, mud, bugs etc before dismantling the tent. Also ensure that all storage cans are emptied, after which you sweep the outside of the tent to remove any dew, leaves or twigs etc. The concept is to remove anything that might puncture your tent’s floor, walls or roof or dirt that might get rubbed on your tent when it is folded for storage.
The cleaning process should be continued, even while folding the tent, sweep the bottom of the tent so that sand, grit, and rocks would not get inside the folded tent. Dust off any mud or dirt on the tent stakes and poles, this keeps other equipment and the inside of your vehicle clean. Immediately you are done with folding your tent, put it in its storage bag and place it where it won’t get dirty.
2. Give Your Tent a Thorough Cleaning Before You Store it away
This particular procedure isn’t necessary for every camping trip, but it is very essential to clean your tent after a rainy trip before you put it away.
The first step is to set it up in your backyard. Make sure the window and door folds are placed down. Sweep the inside of your tent again and then use a clean cloth and a non-detergent soap to remove any stains, spills or grime. Don’t forget to clean the tent stakes and poles. Use a hose to clean the inside and outside of the tent, after which you lift it to drain out water from all corners.
3. Make Sure Your Tent is completely Dry
Always allow your tents to dry despite the fact that it is water resistant to prevent mold and mildew. If you can’t wait for your tent to get dry, below are some simple tips to adhere to
Fold up the tent loosely and keep it away, until you get home. Once you get home, set up your tent in an open area and allow it to dry, avoid water heaters or devices that give off heat.
Properly clean the tent as stated in step 2 above. Then allow the tent to dry completely, this may take about a day or two to dry depending on the weather. The windows and door flaps should be closed to make sure they are properly dried. After the exterior part of the tent has been dried, open the window and door flaps to dry the interior of the tent. If you are in a hurry to dry your tent, you could use a fan to speed up the drying process.
4. Make Sure Your Tent is in Good Repair
Once you are done with the drying process, examine your tent and be certain that it is in good shape. Try to seal off all the seams to protect it against moisture, change bent tent stakes and stitch up any torn stake loops.
5. Pack Your Tent Correctly
Lastly, once your tent is completely clean and dried, fold it in the same manner as it was when you purchased it. Then put it in its storage bag, including the tent poles, stakes, etc. You could also shove it into its sack to prevent wrinkles that damage the fabric with time.
After clean a tent, your tent is now ready for storage. Put it away in a cool and dry place. Find the tips for choosing the tent here.